Drum Pump for Corrosive Liquids | Flux F 430 PVDF Pump Kit

The Flux F 430 PVDF drum pump for corrosive liquids is a high-performance drum pump kit. This pump kit is ideal for the controlled transfer of aggressive, highly corrosive chemicals. Furthermore, this kit prioritises chemical compatibility, thermal stability and operator safety. It provides a complete solution for industrial professionals handling oxidising acids, halogens and also reactive agents. In addition, the F 430 in PVDF uses highly resistant PVDF material, a precision-engineered mechanical seal and a corrosion-resistant Hastelloy C shaft. It handles high-purity acids and other corrosive media up to 80 °C. The drive motor is our proven F 458 IP55 double-walled model. This model is suitable for continuous-duty operation even in challenging, fume-laden environments. Used for industrial chemical processing, wastewater treatment and laboratory dispensing tasks, this drum pump for corrosive liquids combines technical excellence with field-proven reliability. 

Part numbers available

The following part numbers are available on our online shop:

• 10-45860010
• 10-45860012

• Pump type: Flux F 430 PVDF-40/33 with ceramic-oxide mechanical seal 

• Outer tube material: Polyvinylidene fluoride (PVDF) 

• Driveshaft: Hastelloy C with 6 mm diameter for maximum vibration resistance  

• Inner tube: PVDF over-moulded steel core for enhanced structural integrity 

• Impeller: ETFE axial impeller 

• O-rings: FKM (alternative FFKM o-rings for ultra-aggressive chemicals available on request) 

• Immersion length: 1000 mm (for 200-220 litre drums) or 1200 mm ( for 1000-litre IBCs) 

• Outer tube diameter: 40 mm  

Motor type:

F458, brushed commutator, fixed speed 

• Power supply: 230V 50Hz 

• Ingress protection: IP55 

• Power rating: 460W 

• Duty cycle: S1 continuous duty 

• Housing type: Double-walled, totally enclosed, externally cooled, double insulated 

• Housing material: Aluminium with corrosion resistant paint 

• Cable length: 5 m 

• Plug type: UK 3-pin mains adaptor included 

• Alternative 110V motors and compressed air motors also available on request. 

• Hose: PE-lined chemical hose, DN19, 2 m length 

• Hand nozzle: PVDF with PTFE gaskets and FKM o-rings. Compatible with corrosive and oxidising agents. Alternative FFKM o-rings available on request. 

• Compression gland: Polypropylene, G2″ male thread 

• Max flow rate: Approx. 40 LPM1 

• Max delivery head: Approx. 9.5 metres water column (mwc) 

• Maximum liquid temperature: 80 degrees C 

• Max density: Approx. 1.5 kg/L 

• Max viscosity: Approx. 600 mPas  

*measured using water at 20˚C with hose and hand nozzle connected.