Flux FES 800 Chemical Drum Pump Kit for Cleaning Agents

The Flux FES 800 chemical drum pump kit is a compact, seal-less pumping solution. It transfers cleaning agents and disinfectants from small drums and hobbocks, typically 60 litres in size.

• The kit prioritises operator safety and chemical compatibility.
• It includes the high-performance F 424 polypropylene pump, an FEM 4070 variable-speed motor, fume gland, discharge hose and accessories.
• With no wetted mechanical seals, a corrosion-resistant polypropylene body and a Hastelloy C driveshaft, the F 424 PP drum pump is consequently ideal for heavy-duty acid and alkali dispensing.
• This pre-assembled chemical drum pump system is ideal for transferring low viscosity cleaning agents, sanitisers and disinfectants. Settings include laboratories, hospitals, schools and water treatment applications, such as swimming pools.
• This unique kit includes our fume gland that seals the pump into the drum, thereby eliminating emissions of harmful vapours, while still allowing air into the container. 

Part numbers available

The following part numbers are available on our online shop:

• 10-40744208

• Pump type: Flux F 424 PP-41/36, seal-less 

• Outer tube material: Polypropylene (PP) 

• Driveshaft: Hastelloy C reversible driveshaft with 6 mm diameter for maximum vibration resistance 

• Inner tube: Reinforced PP with unique PTFE spiral bearing 

• Impeller: ETFE axial (high-flow) impeller 

• Immersion length: 800 mm for small containers or hobbocks 

• Outer tube diameter: 41 mm

Motor type:

FEM 4070, brushed commutator, variable speed 

• Power supply: 230V 50Hz 

• Ingress protection: IP24 

• Power rating: 500W 

• Duty cycle: S1 continuous duty 

• Housing type: Single-wall, internally cooled, double insulated 

• Housing material: Polyamide 

• Cable length: 5 m 

• Plug type: UK 3-pin plug adaptor also included 

• Alternative 110V motors and air motors available on request 

• Hose: PVC, DN19, 2 m length 

• Hand nozzle: Polypropylene hand nozzle with FKM seals 

• Compression gland: FES fume gland for vapour control, suitable for plastic drums with G57x4 female threaded bunghole. 

• Max flow rate: Approx. 60 LPM¹ 

• Max discharge pressure: Approx. 9.5 mwc 

• Maximum liquid temperature: 50 degrees C 

• Max density: Approx. 1.5 kg/L 

• Max viscosity: Approx. 600 mPas 

• Solids: Not suitable for large quantities of solid particles (see Flux F 430) 

*Measured using water at 20°C with nozzle and hose attached.