Flux Pumps Portable Drum Pump Kit with Detachable Battery Motor

• Pump type: FP 314 PP-32/25, seal-less 

• Outer tube material: Polypropylene (PP) 

• Driveshaft: Hastelloy C 

• Bearing: Unique Flux PTFE / carbon spiral bearing 

• Impeller: ETFE impeller 

• Immersion length: 1000 mm 

• Outer tube diameter: 32 mm 

• Outlet thread: G 1 A 

Motor type:

FBM-B3100, brushless battery motor with soft start, stepless speed control from 5000 to 15,000 RPM 

• Ingress protection: IP44 

• Power rating: 200 W  

• Duty cycle: S1 continuous duty 

• Housing type: Double wall, double insulated- protection class II, overload switch, low current cut-off, electronic temperature control 

• Housing material: Polyamide (resistant to steam and corrosive fumes) 

• Ambient temperature range: 0 to 40 degrees C 

• Weight: 1.2 kg 

• Certifications: UKCA, CE, VDE-GS 

• Battery model: B15-3100 

• Type: Lithium-Ion, 18V, 2.5 Ah 

• Battery protection: Overload, deep discharge, overcurrent, short circuit 

• Sleep mode: Yes 

• Dimensions: 115 x 75 x 46 mm 

• Ambient temperature for storage: – 20 to + 60 degrees C 

• Weight: 350 g 

• Charger model: BCH-3100 

• Charging time: 30 minutes 

• Voltage: 220-240V, 50-60 Hz 

• Temperature loading range: + 5 to 40 degrees C 

• Ambient temperature for storage of charger: – 20 to + 60 degrees C 

• Insulation class: T40/E 

• Cable length: 2 m with 3-pin plug adaptor 

• Protection features: Reverse polarity, defective battery detection, electronic temperature control 

• Status display: LED indicators 

• IP rating: IP30 

• Motor connection: 2 x quick-release clamps 

• Hose: DN19 PVC, 1.5 m length 

• Hose connection: DN19 polypropylene 

• Hand nozzle: Polypropylene with FKM seal and 22 mm nozzle outlet size 

• Quick-release clamps for motor-to-pump connection 

• Hand nozzle holder built into the pump outlet 

• Max flow rate: Approx. 21 L/min1 

• Max delivery head: 5 mwc 

• Maximum liquid temperature: 45°C 

• Max density: 1.3 kg/L 

• Max viscosity: Approx. 250 mPas  

*measured using water at 20°C with hose and hand nozzle connected.