No products in the basket.
Discover our comprehensive range of electric drum pumps, designed to meet every liquid transfer requirement. Explore the F 300, F 400 and F 500 series pump ranges and understand their typical applications. Often copied, but never beaten on quality, durability and performance, Flux electric drum pumps are the ideal solution for transferring products from drums, barrels and IBC containers.
Select from single-phase commutator motors or heavy-duty three-phase motors, all supported by our modular, interchangeable mounting system for optimal performance and flexibility. Find the ideal electric pump configuration for your specific application with ease.
Perfect for emptying small 20 litre containers right up to 1,000 litre IBCs, these compact, portable pumps are ideal for pumping smaller quantities, or infrequent use. They are available with either 110 V or 230 V motor to suit your requirements. Designed for liquids of approximate max. viscosity 250 mPas and max. density of 1.4, F 300 pump tubes are available in polypropylene, PVDF and stainless steel materials to suit your application.
Ready to find the perfect F 300 series pump for your needs? Read more about our 300 series pumps here.
There’s an F 400 series electric drum pump for almost every application. From transferring flammable liquids or food products, to pumping concentrated acids or high-value fragrances and even mixing in drums or IBCs. The F 400 series’ modular design means you can power several different pumps with just one motor, or customise your pump for a particular application. Simply follow the steps below to select the ideal pump and motor combination:
| Flux Electric Motor | Basic description: |
|---|---|
| FEM 4070 or F 457 | 500 W or 800 W IP24 motors for general industrial use |
| F 458 or F 458-1 | IP55 totally-enclosed motors for sanitary applications or areas with steam or corrosive fumes |
| F 460 or F 460-1 Ex | Explosion-proof brushed motors for hazardous ATEX areas |
| FBM 4000 Ex | Explosion-proof brushless motor for heavy-duty use |
| F 414 | 3-phase electric gear motors for continuous, heavy-duty running |
| Flux Pump | Basic description: |
|---|---|
| F 424 | Seal-less drum and IBC pumps for maximum service life with clean fluids |
| F 425 | 99.9% emptying pump for dangerous or high-value liquids |
| F 426 | Selectable mixing pump, available in polypropylene or stainless steel 316 |
| F 427 | Seal-less food-grade pump (compliant with EC 1935/2004 and FDA CFR 21) |
| F 430 | Drum and IBC pumps with mechanical seal, ideal for abrasive or solids-laden fluids, food products, and applications requiring minimal cross-contamination |
To find out more about our range of 400 series pump tubes, click here to read further details. Interested in electric motor options? Visit our shop to configure the perfect electric pump for your needs.
Interested in our F 500 Series high viscosity drum pumps? Click here to visit our Viscopower page for full details and discover the best solution for your application.
F 500 pumps are powered by the F 457 800 W single-phase motor, the F 403 gear motor, or a choice of three-phase motors, depending on model. Read on to explore our full range of motor options for high viscosity pumping.
Flux drum pump motors are ergonomically designed, tough and energy efficient. Models are available for both 230 V and 110 V single-phase electricity supply. Furthermore, every Flux motor is a serviceable design, rated for continuous running (marked S1) and 100% made in our German factory using European components. Each motor is individually tested before sale. Moreover, our motors draw less current for the same performance, when compared to competitors’ products.
Flux manufactures both internally-cooled and externally-cooled electric drum pump motor designs, with power ratings from 230 W to 800 W.
FEM 3070, FEM 4070 and F 457 motors are economical, heavy-duty designs for standard industrial drum and IBC transfer applications. These motors have a nylon body with IP 24 ingress protection against dust and liquid.
Cooling air is drawn through the motor windings by the fan. Therefore, these motors are not suitable for long term use (or storage) in environments with corrosive or explosive vapours, for example, concentrated acid baths or ATEX zoned areas.
In addition, microscopic carbon deposits, created as the motor brushes wear, are not retained inside the motor housing. Therefore, we recommend using externally-cooled, double-walled motors for sanitary, food and pharmaceutical applications.
F 458 and F 460 Ex motors are double-walled alloy bodied designs, suitable for sanitary applications, use in corrosive atmospheres and ATEX zoned areas containing flammable vapours (F 460 Ex model only).
Furthermore, these motors feature class-leading IP 55 ingress protection and corrosion resistant paint. For extreme, heavy-duty use, consider the maintenance-free FBM 4000 brushless motor.
Please call us on 01202 823304 or email sales@flux-pumps.co.uk for assistance
Flux three-phase electric drum pump motors are designed for demanding industrial applications where pumps face extreme operating conditions with extended duty cycles. These motors deliver consistent speed, therefore ensuring stable and reliable performance, even in heavy-duty operations. Furthermore, these motors do not use carbon brushes and their low-wear design reduces maintenance requirements.
With high output power, three-phase motors are typically used with our IBC mixers and F 500 series Viscopower high-viscosity pumps, for handling fluids up to 100,000 mPas. However, F 414 motors are also available for use with our F 400 series centrifugal pumps.
These motors provide exceptional durability, efficiency and long-term reliability for a wide range of electric drum pump applications.
Flux three phase motors are available with:
Motor F 414 – Extreme duty three-phase motor for F 400 series
Motor F 403 – for high-viscosity F 500 series with i7 gearbox
Motor DSM – For F 500 series progressive cavity pumps
Spur gear drive motor – For variable speed control for F 500 series pumps
| Motor | Speed Options | Power | Explosion Protection | Weight |
|---|---|---|---|---|
| F 414 | 2850 rpm | 550 W, 750 W or 1100 W | None | 8.8 - 12.8 kg |
| F 403 with i7 gearbox | 2850 rpm (up to 30,000 mPas) 1450 (up to 80,000 mPas | 550 W | II 2 G Ex e II T3/T4 (optional) | 8 kg |
| DSM | 750 rpm or 1000 rpm | 800 W - 2200 W | II 2 G Ex e II T3/T4 (optional) | 12.5 - 23 kg |
| Spur gear drive | 47 - 472 rpm | 800 - 1100 W | II 2 G Ex e II T3/T4 (optional) | 12.5 - 23 kg |
Flux three-phase motors provide high-efficiency, long service life and reliable performance, even in the most challenging industrial environments. Please contact our technical sales team for help and advice when selecting the right three-phase motor for your needs.
A electric drum pump is a convenient, safe way to transfer liquids from drums and containers. A top-mounted motor is used to drive a shaft-mounted impeller, which is located at the bottom of a long pump tube. The pump is inserted into the drum. Centrifugal force created by the impeller drives liquid up the pump tube and out of the side discharge port.
Motors and pump tubes are available in different materials, lengths, types and configurations, to suit a wide range of industrial applications.
230 V drum pump motors are more common, being used with standard mains electricity supply and fitted with a 3-pin plug. Lower voltage 110 V motors are a safer option, designed for use on high risk industrial and construction sites. 110 V motors are often used in conjunction with a mains transformer that reduces the voltage.
As a rule, 230 V motors are more efficient than 110 V, however, they both deliver the same power output. The choice depends on the application, power supply available, customer specific rules and site safety requirements. To find out more, visit our helpful information on electric motors here.
To select the ideal electric drum pump, consider container depth, liquid viscosity, desired performance (flow rate & discharge pressure), duty cycle and available power supply. Check that wetted materials are chemically compatible with the liquid and that the pump meets applicable standards eg. for handling food products, or flammable media. For more detailed advice, see our drum pump selection guide.
Choosing the right electric drum pump motor is essential for efficient and reliable fluid transfer. Flux are the drum and IBC pump experts - we can always offer the ideal motor for your application.
Get in touch today for expert advice or explore our full range of electric drum pump motors on our shop pages to find the perfect fit for your application.
Alternatively, you can learn more about our battery and pneumatic motor options.
