FMC 100

For manual or semi-automatic filling of different fluids

Branch: ChemistryBranch: IndustryBranch: Surface technologyBranch: PetrochemistryBranch: AgricultureBranch: Water treatmentBranch: Paints and lacquers

FLUX Flow meters, nutating disc type FMC 100, are designed for the use with FLUX drum pumps or for the stationary application e.g. in piping systems. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier.  This way e.g. motor and / or magnetic valve and the most different processes can be controlled.

  • Application areas: Atex  

Technical data:

  • Flow rate: min. 10 l/min - max. 100 l/min
  • Filling accuracy: +/- 1 %
  • Operating pressure: max. 6 bar
  • Size of solids: max. 1,5 mm
  • Viscosity: min. 1 mPas - max. 2500 mPas
  • Housing Materials: Polypropylene, Stainless steel, Ethylene-Tetrafluoro-Ethylene
  • Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels, Aqueous salt solutions

Product attributes

  • Nutating disc type
  • Insensitive functional principle
  • Inductive counter  - independent of the conductance of the medium
  • No metals in the medium area
  • High resistancy
  • Low weight
  • No mains connections required
  • Ex-protected

 

Benefits

  • Insensitive to small solids
  • Easy Handling
  • Control by PLC possible
  • Also for the use in hazardous areas
  • Easy assembly on pump
  • Batch operation possible
  • Also for non-lubricating media

 

  • Media examples

    Housing Material PP:
    Battery acid, formic acid, ammonia, formic acid, boric acid, brake fluid, calcium chloride, acetic acid, ferric chloride, photo developers, glycol, mineral oil, sodium hydroxide, phosphoric acid, hydrochloric acid, sulfuric acid to 60 %, tartaric acid, Zinc chloride, citric acid

    Housing Material ETFE:
    Bromoacid, butylamine, chloroform, diethyl amine, ethyl acetate, essential oils, ethylene oxide, hydrofluoric acid to 40 %, aqua regia, nicotinic acid, nitrating acid to 70 %, petroleum ether, nitric acid (diluted), nitric acid (concentrated) sulfuric acid to 98 %, tetrahydrofuran, hydrogen peroxide

    Housing Material S:
    Acetone, butanol, ethyl, acetate, ethyl alcohol, freon / freon, glycerin, hexanol, isopropyl ether, linseed oil, methanol, methylene chloride, methoxybutanol, mineral oil, Perchlorethylene, petroleum, styrene, trichlorethylene

     

  • Downloads