F 430 TR IBC Pump

For installation in pipeline, on trolley or baseplate

Branch: IndustryBranch: Surface technologyBranch: PetrochemistryBranch: Water treatmentBranch: Paints and lacquersBranch: Chemistry

Pump F 430 TR is ideal for transferring low viscosity liquids from IBCs, tanks and other containers with low level outlet, e.g. if a tank is not accessible from the top, or if spatial conditions limit use of a vertical pump. The pump can easily be disassembled for cleaning or maintenance. Available in stainless steel or polypropylene materials, the stainless steel version is ATEX certified for use in hazardous areas for handling low flashpoint liquids.  F430 TR is suitable for use with all FLUX single phase elctric and compressed air motors.

  • Application areas: Atex  

Technical data:

  • Flow rate: max. 240 l/min1
  • Delivery head: max. 30 mwc2
  • Viscosity: min. 1 mPas - max. 1200 mPas2
  • Outer tube diameter: min. 40 mm - max. 41 mm
  • Length: 200
  • Materials outer tube: Stainless steel, Polypropylene
  • Media / Fluids: Solvents, Fuels, Petroleum products, Alkalis, Acids, Highly flammable media
  • Seal: with mechanical seal
  • Container: 1000 l IBC, Container with floor drain
  • 1 The maximum delivery rate is a test bench value, measured with water at 20 ° C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.
  • 2 dependent on pump model, motor and medium

Product attributes

  • Suitable for most low viscosity liquids with viscosity <1200 cP
  • Perfect for use with IBC's
  • Mechanical seal ensures liquid and solid particles cannot enter inner tube and bearings
  • Can be used in fixed and mobile (trolley mounted) applications.
  • Can be disassembled into two main parts in seconds: inner tube (complete with impeller) and outer tube
  • 200 mm long
  • Suitable for heavy duty applications and continuous running
  • Temporary operation against closed valve (eg. hand nozzle or ball valve) possible until max. operating temperature has been reached

Benefits

  • Provides highest flexibility - variable orientation
  • Can also be used where low ceiling heights limit access
  • Stainless steel version ATEX certified for use in hazardous areas
  • Can be integrated into pipe systems
  • A horizontal centrifugal pump that can be used with most FLUX motors
  • Use with FLUX flowmeters and FLUXTRONIC one-touch progammable filling system
  • Appropriate Motors

    Commutator motors
    FEM 4070
    Delivery rate max. 215 l/min
    Delivery head max. 10 mwc

    F 457 / F 457 EL
    Delivery rate max. 200 l/min
    Delivery head max. 12 mwc

    F 458 / F 458 EL
    Delivery rate max. 200 l/min
    Delivery head max. 9,5 mwc

    F 460 Ex / F 460 Ex EL
    Delivery rate max. 200 l/min
    Delivery head max. 9,5 mwc

    F 458-1 / F 460-1 Ex
    Delivery rate max. 220 l/min
    Delivery head max. 12 mwc

    Brushless motor
    FBM 4000 Ex
    Delivery rate max. 220 l/min
    Delivery head max. 11 mwc

    Three-phase motor
    F 414
    Delivery rate max. 185 l/min
    Delivery head max. 11 mwc

    Compressed-air motor
    F 416 Ex / F 416-1 Ex / F 416-2 Ex
    Delivery rate max. 240 l/min
    Delivery head max. 13 mwc

    The maximum delivery rate is a test bench value, measured with water at 20°C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.

  • Media examples

    Polypropylene material:
    Hydrochloric acid, boric acid, sulfuric acid, citric acid, lactic acid, phthalic acid, sodium hydroxide, potassium hydroxide, ammonia water  

    Stainless steel material:
    Petroleum, diesel, heating oil, hydraulic oil, machine oil, motor oil, gasoline, formic acid (as from 85 %), ethyl glycol, petroleum, "MEK (methyl ethyl ketone = butanone), octane, ethanol, methanol, butanol, acetan, toluene, isobutanol, propanol, xylene, urea solutions, white spirit   

  • Downloads