F 430 high performance IBC pump

For high flow and pressure applications

Branch: IndustryBranch: Surface technologyBranch: Water treatmentBranch: Chemistry
  • .

Transfer faster, further or higher! Pump F 430 PP 100/50 was designed for tank and IBC applications where higher delivery pressures are required. Instead of standard 38 mm rotor, this pump is equipped with a larger 50 mm impeller enclosed in wider diameter housing. When used with powerful compressed air or 800W electric motors, the pump can deliver high pressures of over 3 bar compared to pumps with semi-axial rotors. This makes it ideal for conveying liquids from IBCs and tanks into higher lying pipe systems or for example, from an IBC in the basement to higher floors. Note this pump cannot be used with closed top 200 litre drums. 

 

Technical data:

  • Flow rate: max. 105 l/min1
  • Delivery head: max. 32 mwc2
  • Viscosity: min. 1 mPas - max. 105 mPas2
  • Immersion length: 1000, 1200, 1500
  • Materials outer tube: Polypropylene
  • Media / Fluids: Acids, Alkalis, Hardly flammable media, Neutral media, Thin media
  • Seal: with mechanical seal
  • Container: 1000 l IBC
  • 1 The maximum delivery rate is a test bench value, measured with water at 20 ° C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.
  • 2 dependent on pump model, motor and medium

Product attributes

  • For acids, bases and almost all low-viscosity neutral liquids
  • Mechanical seal to prevent liquid and solid particles entering the inner tube
  • Steel cored inner tube for optimal strength and driveshaft stability
  • For IBCs and tank use only
  • Ideal for use with bolted IBC caps
  • Can be used with all FLUX motors
  • Suitable for the toughest applications
  • Max viscosity 1200 cP
  • Max density 1.8

Benefits

  • Heavy duty, suitable for continuous running
  • Offers significantly higher flow and delivery head compared to standard pumps with half-axial rotor (Z-rotor)
  • Allows liquid transfer from an IBC or tank to higher floors
  • Fully serviceable with all parts available to buy as spares
  • Ideal for pumping into a higher lying pipe system
  • Can be used as a supply pump of line networks e.g. process water feed
  • Unique steel re-inforced inner tube gurarantees mechanical seal stability in all application temperature ranges