- Potassium hydroxide (30%)
- Sodium hydroxide (30%)
- Ammonia water
- Formic acid (50 %)
- Acetic acid (80 %)
- FLUX en-GB
- Products
- Drum, Barrel & IBC Pump Kits | FLUX Pumps UK
Plastic drum pumps for acids and alkalis
Pre-assembled pump kit to pump alkalis of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising sealless drum pump F 424 with outer tube in polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland.
Technical data:
- Flow rate: max. 60 l/min1
- Delivery head: max. 9,5 mwc
- Viscosity: min. 1 mPas - max. 600 mPas
- Outer tube diameter: max. 41 mm
- Immersion length: 1000, 1200
- Materials outer tube: Polypropylene
- Media / Fluids: Alkalis
- Seal: sealless
- Container: 1000 l IBC, 200 l drums
- 1 The max. flow rate is achieved in the mentioned configuration with the medium water at 20°C and discharge height = height of outlet.
Product attributes
- Non-sensitive to dry-running
- No seal wear
- No bearing wear
- Low maintenance
- Built to last
Benefits
- No seal in the liquid area
- No contamination of the medium from lubricants or wear of seal materials possible
- Free from wear
- Relief openings provide the same fluid level inside the pump compared to the drum content
- Kit components
- Available with:
Drum pump F 424 PP-41/36 in polypropylene (max. 60 l/min)
Drum pump F 430 PP-40/33 in polypropylene (max. 40 l/min) - Commutator motor FEM 4070, 230 Volt, 50 Hz, 500 Watt
- PVC hose DN 19, 2 m long
- Hand nozzle polypropylene
- Compression gland polypropylene
- Available with:
- Media examples
- Downloads